Polar Cloud
- Action Buttons
- Adding Alerts
- Adding Users
- Adding Users to Alerts
- Alert Action Triggers
- Alert Types
- Calculated Fields
- Can I change my login details ?
- Configure a 4–20mA sensor reading
- Configure a pulse water meter
- Create a conditional alert with several thresholds
- Device Dashboard
- Download Polar App on your phone
- Editing Users
- First Time Setup
- Groups
- Home Screen Navigation
- How do I get my login details?
- How to edit a users account details
- Poll Rates
- Read connection status and Site licence usage
- Remote Programming
- Removing A User
- Schedulers
- Sites
- Software License
- User Roles
- Viewing Active Alerts
- Viewing Historical Alerts
- What happens during an internet or power outage?
- What happens to schedules and alerts during an outage?
- Show all articles (16) Collapse Articles
What happens if my gateway loses internet or power?
The answer depends on the gateway type, whether it has power and whether its Site licence is active. This internet-outage comparison assumes an active licence. On licence expiry, gateway cloud service is suspended and Glacier Edge is commanded to stop data collection and enter dormancy.
How LTE and Ethernet gateways communicate
The Polar Cloud generates the Modbus requests, sends them through the gateway to the equipment, and receives the replies back through the gateway. The gateway does not run a local polling or control program. A working cloud connection is therefore needed to obtain new readings through these gateways.
Internet outage while the gateway remains powered
| Function | Polar LTE / Ethernet gateway | Glacier Edge, standalone or inside EMS |
|---|---|---|
| Local storage of readings | No local data buffer. Readings from the disconnected period are lost. | Local storage of up to 100GB is available. |
| Local scheduling and control | No local scheduling or automation engine. Cloud actions cannot reach the disconnected gateway. | Scheduling configured for edge execution and local control continue while the relevant hardware remains powered and licensed. |
| After internet returns | New readings can reach the cloud again. There is no local backlog to fill the disconnected period. | Locally stored readings synchronise to the cloud. |
| Cloud reading-based alerts during the outage | The cloud cannot evaluate unavailable current readings. | Cloud-only evaluation cannot see unavailable readings. Locally enabled Glacier alerts can evaluate and timestamp events; their notifications are delayed until cloud reconnection. |
Glacier Edge is the gateway used inside Polar EMS systems and can also be purchased as a standalone gateway. Its local capabilities differ from ordinary LTE/Ethernet gateway functionality. All Glacier Edge setup and configuration is managed through the cloud. There is no local plug-in route for changing its configuration. While licensed, local schedules and control can continue through an internet outage. Licence expiry is different: Polar commands the unit to stop data collection and go dormant. Cloud-side configuration requires a valid licence.
Up to 100GB describes storage capacity, not a fixed number of recording days. Do not assume unlimited offline retention or that every cloud automation has automatically been configured to run locally.
How will I know device data has stopped arriving?
The alert currently labelled Gateway Offline checks the database for new records from the selected device. If no device data has been inserted for the configured period, it triggers. Functionally, this is a device-data offline alert, not proof that the gateway itself has lost its cloud connection. A device-side communication failure can therefore cause the alert even while the gateway remains connected. Investigate both the gateway connection and the device communication path.
Set up and test the alert and its intended recipients during commissioning. Confirm the configured detection interval rather than assuming the notification is immediate.
Where are notifications sent from?
Notification delivery uses the cloud. Alert evaluation can run in the cloud or, where configured, locally on Glacier Edge. Supported delivery channels include WhatsApp, email, SMS and phone PWA push notifications. The phone PWA is Polar’s web app installed on your phone.
If a gateway is disconnected, cloud-only alerts cannot evaluate new device readings that are not reaching the cloud. Glacier locally enabled alerts can evaluate and retain event timestamps while powered offline, then send their notifications after reconnection. Local storage does not provide notification delivery during the disconnection. See Automation recovery for missed schedules and reconnect behaviour.
What happens during a power failure?
All gateway types go offline if their power fails and no backup power is available. No readings are recorded by an unpowered gateway. Glacier Edge’s local storage and control capabilities require power.
If operation during a power outage is required, the installer must plan backup power for the gateway and the equipment needed to produce and communicate the readings. Powering the gateway alone does not make an unpowered sensor or controller provide new readings.
Commissioning checks
- Identify the gateway model before choosing outage expectations.
- Verify normal readings and timestamp updates.
- With the installer present, test the agreed communications-loss scenario and Gateway Offline notification.
- For Glacier Edge, verify the intended local logging, schedules and controls, then confirm data synchronisation after reconnection.
- Record what backup power covers and what remains unavailable during a power failure.