Skip to main content
Print

Adding Users to Alerts

Choose alert recipients and notification channels

  1. On the device’s Alerts page, open Notifications.
  2. Open the settings for the existing notification group associated with the device.
  3. Enable the group as required.
  4. Review each recipient and select the required channels: Email, SMS, Push and/or WhatsApp.
  5. Use the bulk controls when the same channel selection should apply to all recipients, then review the resulting individual selections.
  6. Choose Add Users and search the available user list to add an existing user to the recipients.
  7. Remove recipients who no longer need the alerts and confirm the final configuration.

WhatsApp must be enabled and verified before that user’s WhatsApp selection is available. An unverified recipient cannot simply be selected for WhatsApp delivery. The verification route is described below; selecting recipients and verifying a recipient’s own channel are separate steps.

An alert can be configured correctly but still fail to notify the intended person if the alert, its notifications, the existing recipient group or the required channel is disabled. Check the saved settings and perform an agreed trigger-and-restore test with each intended recipient. Do not assume that seeing a configured channel proves receipt.

Verify your own email, SMS and WhatsApp

Notifications Only users can log in to their own account/profile information to complete verification; they do not need ordinary Site/device access.

  1. Log in and click your name/profile on the left-hand side to open My Profile.
  2. Check that your email address and phone number are correct.
  3. If email is not verified, choose its Verify option and follow the displayed verification process.
  4. Choose the SMS verification option when SMS is unverified. Polar sends a one-time password (OTP) by SMS; enter it in the verification prompt and choose OK.
  5. Verify WhatsApp using its corresponding verification option and OTP process.
  6. Check that the relevant channels show Verified, then click Save to save the profile settings.
  7. Have the responsible person check that you are selected as a recipient and that the required channels are enabled in the existing alert notification settings.

For email verification, follow the current screen prompts; do not assume that email uses the SMS OTP process.

Re-verify a channel after delivery failures

Polar records failed deliveries for SMS, email and WhatsApp. After ten delivery failures (“bounces”), the affected messaging channel is deactivated to avoid continuing to send messages that are not received. This is delivery failure handling, not a repeat-alert setting.

Return to My Profile, check/correct the affected contact details, use the relevant verification option again and save. Then check the channel selection in the alert recipients and test delivery. Do not assume ten failures means ten consecutive failures: the counting/reset rules were not specified.

Enable and test PWA push notifications

Push notifications do not use an email, SMS or WhatsApp-style verification process. Open your profile/user page and scroll to the Notifications section at the bottom.

  1. If push has not yet been enabled, choose Enable Push Notifications.
  2. Check the displayed status indicators. Check for Notifications supported and Notifications allowed.
  3. Choose Test Notifications to run a PWA notification test, and confirm that the notification is actually received on the intended device.
  4. Once enabled, the button is labelled Reset Notifications. Resetting is not a required activation step.
  5. Separately check that Push is selected for the recipient in the existing alert notification settings, and test an agreed alert trigger and resolve.

The notification test checks the push route; it does not prove that a particular alert condition or recipient selection is configured correctly. Reset Notifications may still appear when notifications are not allowed. Use the supported/allowed indicators and actual receipt to judge readiness. If the test fails, record the device/browser and displayed status for support.

PWA capability and permission are separate indicators. This demonstration is supported but not allowed; successful push delivery is not shown.
PWA capability and permission are separate indicators. This demonstration is supported but not allowed; successful push delivery is not shown.
Table of Contents