Skip to main content
Print

Device Dashboard

Use the device dashboard

A device dashboard brings its readings, connection information and available configuration tools together. Which tabs and actions you see depends on device integration and role.

Open the correct device

  1. Open Sites or Devices and choose the intended device’s Dashboard.
  2. Check its displayed name and Site before using any controls.
  3. Review Status, Network and Signal/latency information.
  4. Use Live, History, Alerts, Schedulers and Programming as available to your role.

Read values and history

Live shows the configured data tiles and available control buttons. Inspect units and freshness as well as the value. Use History for stored measurement data where enabled and accessible. Disabled measurement tags stop collecting new history and hide previous history until re-enabled. Some controls and Calculated Fields have different history behaviour; do not assume every tile is a stored physical measurement.

Edit only with the appropriate permission

Technician can configure polling, scaling, Modbus details and controls through edit mode. Manager alone can enable/disable tags but cannot change polling or Modbus registers. Users may operate configured controls; Read Only cannot. Role changes require logout/login.

Site usage is shared

Licence Information on a device dashboard shows whole-Site usage, not a separate allowance for that one device. Use the hover breakdown for details and avoid adding those same totals across dashboards.

Tags and polling · User roles

Table of Contents