Skip to main content
Print

First Time Setup

Installer: set up your first customer Site

This route is for an installer creating Polar access for a customer who relies on them for installation and technical configuration.

Understand Groups and Sites

A Group links users and Sites. A Site belongs to one Group; a Group can have multiple Sites. Parent Groups can see descendant Groups, users and Sites, subject to roles. Child users do not see ancestors or sibling customer branches. The Site holds its licence.

Use an Installer Group as the parent and a separate Client Group beneath it for each customer. Add that customer’s users and Sites to their Client Group. This preserves installer support access while separating customer branches.

1. Register and check roles

A self-registered account receives Manager + Technician by default. This combination supports Group/user administration and technical setup within the user’s access scope. See Roles and access.

2. Create the Installer and Client Groups

  1. Open Groups and use the add/plus control.
  2. Set Parent Group as appropriate and enter the Group Name.
  3. Choose Add Group.
  4. For the customer Group, select the Installer Group as its parent. Review the hierarchy before inviting users.
Add Group: select the intended parent and enter the new customer Group name. Demonstration Group names are illustrative.
Add Group: select the intended parent and enter the new customer Group name. Demonstration Group names are illustrative.

3. Invite the customer

  1. Select the Client Group and open Invite User to Group.
  2. Enter the customer’s email address. This is their login and the invitation destination.
  3. For a new user, complete the displayed details: Full Name, phone number, optional Welcome Message and Select Platform Roles.
  4. For an existing account, Polar recognises the email and permits inviting that user without re-entering all the new-user details.
  5. Choose Send Invite. Select roles for the intended responsibilities; lower roles can restrict higher ones when combined.
New-user invitation fields. Email and phone values are irreversibly redacted; no personal name is entered in this example.
New-user invitation fields. Email and phone values are irreversibly redacted; no personal name is entered in this example.

4. Create the customer’s Site

  1. Open Sites and choose Add Site.
  2. In Basic, enter the Site name/description and choose the Client Group.
  3. If the Group does not exist, Add Group opens the Group creation route. Check its parent before proceeding.
  4. Choose Next and set Location + Timezone.
  5. Continue to Billing Profile, select the appropriate profile and complete the wizard. Billing profiles can be managed through My Profile > Billing Details. If the installer manages the customer and resells the licence, use the installer’s billing information.

A new Site starts a seven-day trial. Use it to configure the installation and establish the needed tag, gateway, alert and scheduler capacity before purchasing the appropriate licence. The trial includes 100 tags, 10 gateways, 32 alerts and 64 schedulers for seven days. Review the terms displayed at checkout for paid transitions and mid-term upgrades.

Add Site wizard: Basic, Location + Timezone and Billing Profile. Select the customer Group, not merely the Group preselected in a demonstration.
Add Site wizard: Basic, Location + Timezone and Billing Profile. Select the customer Group, not merely the Group preselected in a demonstration.

5. Link the gateway

  1. Open Gateways and choose Link New Gateway.
  2. Enter the serial from the physical gateway.
  3. In Gateway Settings, give it a meaningful name, choose the customer Site and set its installation location.
  4. Review the Site allowance preview and the adjacent Gateway Diagnostics: connection, latency and location state.
  5. Finish using the wizard’s final action. Choose Setup on the demonstrated wizard.
  6. Return to Sites and confirm that the gateway appears under the intended Site.
Gateway settings and diagnostics. The gateway serial is removed; usage and connection information remain visible.
Gateway settings and diagnostics. The gateway serial is removed; usage and connection information remain visible.

You can link an offline gateway; the wizard indicates its connection state. If the serial number is not found, the gateway has already been claimed: open a portal support ticket or contact Polar support. Do not delete equipment or create extra Sites as a workaround. For LTE/Ethernet gateways, Link A indicates cloud connection. If a powered unit with antenna attached and area signal does not come online, contact support.

6. Add the monitored device

  1. Expand the Site and choose Add Device.
  2. In the demonstrated Link Device dialog, choose the gateway and Device Type.
  3. Set Slave Id to match the address configured on the actual equipment.
  4. Enter a meaningful Device Name and Description.
  5. Choose Link Device.
Link Device fields for an integrated meter. The gateway identifier is redacted.
Link Device fields for an integrated meter. The gateway identifier is redacted.

The demonstrated serial Modbus network uses 9600 baud, 8 data bits, no parity, 1 stop bit (8N1). Match the attached equipment to those settings and the configured Slave Id. This serial example is not a universal configuration for every Glacier port or TCP device. Select Generic Modbus if no integrated driver is available; register mapping then requires the correct device documentation and specialist setup.

Glacier: Serial or TCP/IP

Glacier supports four isolated RS-485 ports and Modbus TCP. For Serial, select the wired COM port and matching Slave Id. For TCP/IP, use the approved device address in the installation’s 192.168.35.XXX plan and port 502. Avoid duplicate/reserved addresses and check the device-specific network requirements.

7. Check connection and configure the application

The Site list can show Online, Communication error or Gateway offline. Open the device dashboard for Status, Network and Signal information; hover the indicated status/quality area to inspect message latency. These are connection diagnostics, not proof of sensor accuracy. See connection status and Site usage.

Continue to 4–20mA sensor setup, pulse-meter setup, tags/polling, alerts, controls and schedulers for the application. The device dashboard’s licence usage totals apply across the entire Site, not just that device.

8. Licence and customer access

Before the trial ends, review the configured capacity, use purchase or distributor-code redemption to activate a suitable licence, and check the customer Group/roles and notification-channel setup. Use the commissioning/handover record for the agreed scope. Verify the installation against your agreed commissioning scope before handing it over.

Before replacing or moving a gateway

Replacing or moving existing equipment is different from linking a new gateway. Contact Polar support to plan the change and confirm its effect on devices, access and history before unlinking equipment, deleting a Site or attempting a replacement. Provide source and destination Site details and equipment identifiers privately. Do not use a new claim or Site deletion as a migration shortcut.

Table of Contents