FAQs
Polar Questions & Answers
Find a quick answer, then open the linked guide for the full procedure, exceptions and model-specific details.
How do I set up Polar for a new customer?
Create the installer account and parent Group, create a separate child Group for the customer, invite the customer with suitable roles, then create their Site. Link the gateway and add the devices before configuring readings, alerts and controls.
Why can I not see a customer’s Site in Polar?
Check the user’s Group membership and the Group linked to the Site. Users can see their Group’s Sites and descendant Groups, subject to role permissions; membership of a child Group does not give access to parent or sibling Groups.
Can a Polar Site belong to more than one Group?
No. A Site belongs to one Group. A Group can contain multiple Sites, and the Site holds its licence.
Which roles does a new self-registered Polar account receive?
Self-registered users receive Manager and Technician by default. Together those roles provide administrative and technical access within the user’s access scope. Group roles can be assigned when inviting new or existing users.
Can Notifications Only users log in to Polar?
Yes. Notifications Only users can log in to their own account/profile information to verify notification channels. They do not receive the normal Site and device views.
Is a Polar licence per Site or per gateway?
Current Polar licensing is Site-based. The package covers defined limits for tags, gateways, alerts and schedulers within that Site. The older per-gateway licence model is no longer used.
Does a new Polar Site have a free trial?
Creating a new Site starts a seven-day trial with 100 tags, 10 gateways, 32 alerts and 64 schedulers. Use it to configure the installation and establish the required paid licence capacity.
What happens when a Polar Site licence expires?
Site/data access and gateway cloud service are suspended on the expiry day. Glacier Edge is commanded to stop collecting data and enter dormancy. There is no collection grace period, and a new licence is not backdated.
Will I lose my old Polar history if I renew late?
Under the current policy, stored cloud history is retained and becomes viewable again with an active licence. A new licence starts on activation. Periods with no collection remain gaps; renewal does not create missing readings.
What counts as a tag in Polar?
Enabled measurements, control buttons and Calculated Fields count toward the Site tag allowance. Disabled measurements do not count. A single physical device can use several tags.
What happens if I disable a measurement tag?
Polling and new history collection stop, and earlier history is hidden while the tag is disabled. Re-enabling makes its previously recorded history accessible again, with a gap for the disabled period.
What is Polar’s fastest measurement polling interval?
The fastest confirmed measurement polling interval is one reading every five minutes per tag, across the gateway and device types. This is not a guaranteed alert-delivery or control-response time.
Can I link a gateway while it is offline?
Yes. A gateway can be linked while offline, and the linking wizard indicates that state. Linking the gateway does not itself establish a working connection.
What should I do if a gateway serial number is not found?
This indicates that the gateway has already been claimed. Open a support ticket in the portal or contact Polar technical support rather than deleting equipment or creating replacement Sites as a workaround.
What Signal Min and Signal Max should I use for the demonstrated 4–20mA input?
For the demonstrated MB4442 input configuration, use Signal Min 4000 and Signal Max 20000: the values are in microamps. Set the output minimum/maximum and display unit to the actual sensor’s engineering range.
What multiplier should I use for a pulse water meter?
For a display in litres, enter litres per pulse. Use 0.5 for half a litre per pulse, or 100 for 100 litres per pulse. Do not confuse litres per pulse with pulses per litre.
How do I match the Polar pulse total to the physical water meter?
Without resetting, set Calibration Offset to the physical meter total minus the module’s represented volume, using matching units. For litres, represented volume is raw pulses multiplied by litres per pulse. Do not rescale an already scaled value or include an existing offset in that volume.
Reset All Counters resets both pulse counters simultaneously; it is not a single-channel reset. The manual also lists uptime/downtime counters as affected. Any deliberate reset needs an installer-approved plan for every affected baseline and its reporting consequences.
Does Gateway Offline always mean the gateway has lost internet?
No. The alert currently labelled Gateway Offline checks for missing device records in the database. It triggers after no device data has been inserted for the configured period, so a device communication fault can trigger it while the gateway stays connected.
Will Polar keep notifying me while an alert stays active?
No. Polar sends one notification when the alert triggers and one when it resolves. If the same condition stays active for six hours, there is no recurring reminder just because it remains active.
Can I acknowledge an alert in Polar?
Not currently. There is no user acknowledgement function. The alert resolves according to its configured recovery condition.
Why can I not select a five-minute alert check interval?
For a tag-based alert, the check interval cannot be shorter than the tag’s polling interval. If the tag polls every 15 minutes, change that tag to five-minute polling first if five-minute alert checks are required.
Can one alert notify me at several tank levels?
Yes. A Condition alert can use several thresholds on one tag. The example uses less-than conditions at 80%, 60% and 40%, with notifications as the level falls and restoration notifications as it recovers. The measurement must be scaled to the intended units.
How do I verify SMS or WhatsApp notifications?
Open My Profile by clicking your name on the left. Check your phone number, choose the appropriate verification option, complete the OTP process and Save. Verification is separate from choosing your channels in the alert recipient settings.
Why has my Polar messaging channel been deactivated?
Polar deactivates the affected email, SMS or WhatsApp channel after ten delivery failures. Check your contact details and re-verify the channel in My Profile, Save, then check recipient settings and test delivery.
How do I enable and test Polar PWA push notifications?
At the bottom of your profile page, open Notifications and choose Enable Push Notifications if not enabled. Check the supported/allowed indicators and use Test Notifications. Push does not require an OTP verification process; Reset Notifications can appear even when permission is blocked, so the label alone does not prove delivery works.
Will a missed cloud schedule run when my gateway reconnects?
No. If the gateway is disconnected when the cloud schedule attempts its action, that action is lost. It is not replayed when the gateway returns; execution waits for the next scheduled occurrence.
What happens if a measurement is still outside its threshold after reconnection?
Cloud alert evaluation resumes when readings return. If the trigger condition is met, the alert can trigger then. For example, a below-30% tank alert can trigger when the gateway reconnects with a 25% reading.
Can Glacier Edge schedules run without internet?
Yes, when the scheduler is configured to run on the edge and Glacier and the required equipment remain powered, with an active Site licence. A Cloud-mode schedule does not become local automatically.
Can Glacier Edge record alert events while disconnected?
Yes, when local alerts are enabled. Glacier can evaluate locally and retain the trigger timestamp. The notification is sent after cloud connectivity returns, so the recorded event time can be earlier than the message-delivery time.
Will Glacier Edge run during a power outage?
Not without power. Glacier turns off unless battery backup keeps it powered. During an internet outage with power still available, locally configured schedulers can continue.
Do LTE and Ethernet gateways store readings while offline?
No. Standard Polar LTE/Ethernet gateways have no local reading buffer, polling engine or scheduling engine. Readings during disconnection are lost. Powered, licensed Glacier Edge has local storage and can synchronise locally recorded data after reconnection.
Should I use a toggle button for a schedule or alert action?
Use explicit ON and OFF buttons for automation instead. A missed toggle can make later actions switch opposite to the intended state, while a fixed ON/OFF command requests a known state.
How do I create a Polar scheduler?
Open the device dashboard’s Schedulers tab and Add a schedule. Set its name, frequency, days/time and target control. Check the displayed timezone and next occurrences, review the enabled/execution settings, then Create.
Which manual applies to MB4442 V3 hardware?
The current MB4442 V3 hardware uses revision 4 of the manual. Look for the physical V3 marking and teal front-lens colouring. Hardware version and manual revision are different identifiers.
What details are needed when creating a Polar Site?
The Add Site wizard includes Basic details and Group selection, Location + Timezone, and Billing Profile. If the installer manages the customer and resells the licence, they use their own billing information.
Can I activate a licence bought through a Polar distributor?
Yes. Open the Site licence route and select Redeem Existing Licence. Enter the code supplied on the distributor invoice, complete the process and verify the correct Site and licence status.
Which Modbus serial settings are shown in the first-time setup guide?
The demonstrated serial network uses 9600 baud, 8 data bits, no parity and 1 stop bit (8N1). Match the connected equipment and Slave Id. Do not assume those serial settings configure Modbus TCP or every Glacier port.
Does licence usage shown on a device apply only to that device?
No. The displayed licence totals cover the whole Site. Viewing them from another device does not make them separate per-device allowances.
Where do I select Edge execution for Glacier alerts and schedules?
For an alert, open Advanced and select Edge in the Cloud/Edge dropdown. For a scheduler, open Advanced Settings and choose Edge. Save the configuration. Local operation still requires power and an active licence.
Why does my profile say notifications are supported but not allowed?
Support and permission are different states. Reset Notifications may remain visible when push permission is not allowed. Do not assume push works from the button label: use the status indicators and confirm receipt with Test Notifications. If permission remains blocked, check your phone and browser notification settings and contact Polar support with the supported/allowed indicators and your browser version.
Can a Manager change polling or Modbus settings?
Manager alone can enable and disable tags, but cannot change polling intervals or Modbus registers. Technician access is needed for those technical settings.
Why have my new Polar roles not taken effect?
After a role change, log out and log back in. A new login is required for changed roles to take effect.
Whose billing details should a managing installer use?
An installer managing the customer uses their own billing information and sells the licence to the end user. Record the agreed invoicing and renewal responsibility.
How do I install the Polar app on my phone?
Install the Polar web app from the portal using Chrome’s install route on Android or Safari’s Share → Add to Home Screen route on iPhone. Then separately enable/test push notifications in My Profile.
Does changing a Calculated Field formula change its past results?
Yes. Results are calculated on demand from source history, so changing the equation can change historical results. This is not an immutable stored audit record.
Only a Technician can create or edit Calculated Fields. Open Sites, choose the Site’s Manage button, then Calculated Fields and Add Calculated Field. Each field supports up to 23 distinct input variables; the same variable may be reused within its equation. Existing Calculated Fields on the same Site can also be inputs, and fields count toward the Site tag allowance.
Why did I not receive a Polar alert?
First confirm an alert event occurred. Then check Enabled, Notifications Enabled, recipient/channel selections and verification or push permission. Ten delivery failures deactivate the affected messaging channel until re-verified.
Why can’t I see my Site after signing in?
If your question is “I can’t see my site”, start here. Check Group membership, inherited visibility, roles and Site licence status. After role changes, log out/in. A Notifications Only role gives profile access rather than ordinary equipment views.
Does removing me from a Polar Group delete my account?
No. It removes your membership/access to that Group, not your account. Only Managers can revoke Group access. Other Group memberships remain separate.
When can a Polar Group be deleted?
Only when nothing is linked to it. Confirm Site/equipment removal and its data-retention consequences with Polar support before deleting any installation. To revoke one person’s access, remove that user’s Group membership instead.
Is there a limit to how many alert notifications Polar sends?
No notification sending limit applies. The number of configured alert rules is still limited by the Site licence, and one active event still sends one trigger and one resolve notification.
Can a Live Read alert poll faster than five minutes?
No. Five minutes is the minimum Live Read alert polling interval. Live Read does not permit faster polling or continuous instant monitoring.